Construction Light Bars to Keep you Seen and Safe on the Job Site

On any job site, safety is always a top priority! We take great pride in helping equip construction companies with the best and brightest strobe lights and construction light bars. Our construction LED light bars help ensure everyone’s safety and help your crews put in longer days even after the sun goes down. The Wicked Warnings Slick Stick and our Arrow Stick Light Bars are a great choice to illuminate your construction vehicles and equipment. See some of our construction builds below!

2019 & 2020 Ford Escape Construction/Engineering Strobe Lights Package

These 2019 & 2020 Ford Escapes feature a simple and effective construction strobe lights package by Wicked Warnings. In the back hatch of each vehicle, you can see our 4 Head Wicked Slick Stick in amber-white and the front of the vehicles feature two of our LIN-6 in amber. Watch until the end of the video for more detail about where we mounted the construction strobe lights throughout these vehicles. We used a 3/4″ Flush Mount Rocker Switch to control the strobe lights and the construction light bars on these builds.

Click here to see the parts kit. **Please note: For the 2020 Ford Escape, we needed to use some additional hardware to mount the Slick Stick in the hatch. The parts should be available at your local hardware store.

2020 Transit Connect 4-Corner Warning with Traffic Advisor Amber Light Bar

This 2020 Transit Connect Van features a 4-corner amber warning and a rear traffic flow amber light bar. You can see two of our LIN-6 LED strobes alternately flashing in a 75 FPM pattern within the grille from the front of this van. We installed our LED HAW DUO in the HD (high dome) version in the van’s rear. You could also use the LD (low dome) LED HAW DUO. This van will have to stop in traffic occasionally and pull off on the side of the road, so we also added a traffic advisor amber light bar with the left and right arrow stick patterns. This light bar is the amber Feniex Fusion 600 Arrow Stick Light Bar.

The customer also requested additional work lighting in the van’s rear, so we added the Diode Dynamics SS3 floodlights and the headliner right inside the rear doors. The SS3 lights create a 10 – 15 foot radius of usable work behind the van. We used the Mini-6 Switch Control Panel to control all the warning lights and the traffic advisor amber light bar on this van.

Products Featured:

2020 Chevy Silverado HD Featuring Wicked Slick Stick Amber Light Bar

This build shows our Slick Stick LED light bar and some of our strobe lights on a 2020 Chevy Silverado truck. In the front of the truck, we’ve mounted our 6 Head Wicked Slick Stick amber light bar behind the grille. It is important to note that this truck does not have active grille shutters. If your vehicle does have the grille shutters, it may get in the way of this construction light bar install. The Slick Stick is a dual-color construction light bar, so you can choose to flash an all-amber pattern, all-white pattern, or a combination of amber and white.

This amber light bar also features the flood mode steady white override. We can activate the flood mode with or without warning on the rest of the truck. However, if the warning mode is already active on the light bar when you activate the flood mode, the flood mode will override the warning. We also added our LED HAW DUO lights in the back, along with a pair of Baja S1 Work Lights. The work lights are great for working into the night to get the job done! All of the lighting on this build is controlled by the factory auxiliary switches.

Products Featured:

Have Questions or Want to See More Construction Builds?

If you would like to see more of our construction builds, please visit our Wicked Warnings YouTube Channel. Our Channel features many of our different builds and products. If you have any questions, please email us at You can also see more of our strobe lights, light bars, and safety accessories in our Online Store.

Be Seen & Be Safe!

Share on Social

Subscribe To Our Newsletter

Subscribe To Our Newsletter

Join our mailing list to receive $5 off your purchase! Coupon can be used once per customer.

Our monthly email will have updates about our latest news, products and updates from our team!

You have successfully subscribed! Enjoy $5 off your purchase by entering the following coupon code at checkout: MY5

Video Demonstration of Wire Swap Installation for Auto Flasher Kits - Molex Connector Pin Removal & Replacement

What are the Wicked Auto Flasher Kits & how do they work?

Wicked Warnings has been around since 2005 with stellar references and we have been using our WAF (Wicked Auto Flasher) module since early 2016 with zero reported vehicle failures. There is no known risk to using any factory lighting as flashers that we are aware of. Of course, all your factory lights will always revert to factory function when the strobes are not being used.

Many of our builds feature a combination of factory lighting as well as purpose-built emergency lights to create a more effective display, so we urge you to consider more than just factory strobe lighting on your build. We have many options available to supplement the factory lighting.

How does the Auto Flasher connect to my truck anyway?

We have 3 connection methods used in our WAF (Wicked Auto Flasher) kits. The way that we manipulate the factory lighting is through the wires. We DO NOT reprogram any of the computers. Everything we do is easily reversible, and any number of individual kits can be combined onto a single switch if desired. There is no single kit to flash all factory lights, as we must retain circuit individuality. The following three methods are used to interface with the factory wires.

  • Wire Cut: In certain lights, like the white cargo light by the third brake, the only way is to cut a single wire (at this time). We understand that some people are uncomfortable cutting wires and we are working hard to offer “cut-free” solutions as fast as we can. This is how some of the current website kits are sold. Sometimes, this is the only option to achieve the desired display.
  • Wire Swap NO CUT: This is by far our favorite solution and how most of the new generation kits will be made if possible. Wire Swap is how ALL the Headlight and Taillight kits are going to be made for the FORD and many GM trucks. We are working to update the current website options to this new “wire swap” kit and will continue noting any changes on the product online as they happen. It really is just as easy as swapping a wire. Again, the kits will have notes in the description stating which version they are. Click here to watch a video showing the Wire Swap method.
  • (NEW & COMING SOON) Plug N Play Extensions: Plug N Play extensions can be purchased for an extra cost. Please bear with us as these are all handmade and fairly difficult to source parts for. We have some availability and are waiting on some parts for others.

We hope this helps to answer any questions about our Auto Flasher Kits and hope you enjoy these products!


Your Cart