Mini-6 Switch Controller Red Buttons

Mini-6 Switch Panel


PLEASE NOTE: The Mini-6 Controller recently changed from green back-lit buttons to red back-lit buttons. Our current stock is the red back-lit buttons only.

ATTENTION….Many sellers are NOT including the swivel mount with this kit, some charging as much as $29 for it as an accessory. That mount is an INCLUDED part in our kits. Don’t settle for missing parts, trust Wicked with your needs. Get your 24″ WIRE EXTENSIONS here as well as 48″ WIRE EXTENSIONS here for this 8 wire unit.

Additional Details Below

Availability: In stock

Add to Wishlist
Add to Wishlist

The Mini-6 Controller Panel is the most versatile emergency light controller available. This control panel includes six programmable soft-touch buttons that are housed in a 100% waterproof aluminum casing. This controller has an ultra-compact design that allows for mounting in the most convenient places. This panel also features a backlight on the buttons. This ensures that it’s easy to notice which buttons are in use on your panel. Additionally, this panel comes with a full sheet of custom labels to suit any configurations!

This is the go-to controller when you need durability and no-nonsense performance. With 30 amps total power at your fingertips, this controller panel is sure to handle whatever you need. Use the Mini-6 Controller Panel to activate all the safety features on your vehicle in one convenient spot! You can use this panel for activating strobe lights and our popular flood mode on your vehicle. Also, this panel allows for strobe light or LED light bar pattern changes and more! The controller also has a built-in wig-wag flasher. You can use it to flash standard LED lights, as well as power your other accessories. You have the option to program the buttons as momentary or latching buttons as well.

A full multi-mount kit is included with this control panel. You can choose to surface mount the controller or utilize the ball and stud option for a swivel mount. For more information about how to program and wire your controller, please view the installation guide and wiring diagram.

If you have any questions about the Mini-6 Switch Controller Panel, please send us an email at

Additional Features:

  • All six buttons able to program as on/off or momentary
  • Integrated two-channel wigwag flasher
  • Includes surface and swivel mount bracket
  • 4″ L x 2.75″ W x 0.75″ H
  • LED backlit buttons
  • 5 amps of power to all 6 buttons
  • Easy to understand instructions and wire codes


Instruction Guides

Wiring Guide

Mini-6 Installation Guide

You may also like…

Subscribe To Our Newsletter

Subscribe To Our Newsletter

Join our mailing list to receive $5 off your purchase! Coupon can be used once per customer.

Our monthly email will have updates about our latest news, products and updates from our team!

You have successfully subscribed! Enjoy $5 off your purchase by entering the following coupon code at checkout: MY5

Video Demonstration of Wire Swap Installation for Auto Flasher Kits - Molex Connector Pin Removal & Replacement

What are the Wicked Auto Flasher Kits & how do they work?

Wicked Warnings has been around since 2005 with stellar references and we have been using our WAF (Wicked Auto Flasher) module since early 2016 with zero reported vehicle failures. There is no known risk to using any factory lighting as flashers that we are aware of. Of course, all your factory lights will always revert to factory function when the strobes are not being used.

Many of our builds feature a combination of factory lighting as well as purpose-built emergency lights to create a more effective display, so we urge you to consider more than just factory strobe lighting on your build. We have many options available to supplement the factory lighting.

How does the Auto Flasher connect to my truck anyway?

We have 3 connection methods used in our WAF (Wicked Auto Flasher) kits. The way that we manipulate the factory lighting is through the wires. We DO NOT reprogram any of the computers. Everything we do is easily reversible, and any number of individual kits can be combined onto a single switch if desired. There is no single kit to flash all factory lights, as we must retain circuit individuality. The following three methods are used to interface with the factory wires.

  • Wire Cut: In certain lights, like the white cargo light by the third brake, the only way is to cut a single wire (at this time). We understand that some people are uncomfortable cutting wires and we are working hard to offer “cut-free” solutions as fast as we can. This is how some of the current website kits are sold. Sometimes, this is the only option to achieve the desired display.
  • Wire Swap NO CUT: This is by far our favorite solution and how most of the new generation kits will be made if possible. Wire Swap is how ALL the Headlight and Taillight kits are going to be made for the FORD and many GM trucks. We are working to update the current website options to this new “wire swap” kit and will continue noting any changes on the product online as they happen. It really is just as easy as swapping a wire. Again, the kits will have notes in the description stating which version they are. Click here to watch a video showing the Wire Swap method.
  • (NEW & COMING SOON) Plug N Play Extensions: Plug N Play extensions can be purchased for an extra cost. Please bear with us as these are all handmade and fairly difficult to source parts for. We have some availability and are waiting on some parts for others.

We hope this helps to answer any questions about our Auto Flasher Kits and hope you enjoy these products!


Your Cart