Raptor LED Strobe Light Lens

Raptor LED Strobe Light


Wicked Warnings has recently introduced the new RAPTOR LED STROBE LIGHT!! With Amber, White, or Amber&White warning modes AND our popular STEADY WHITE FLOOD MODE this light packs a PUNCH!! 24 total LEDs mean you are NEVER left out in the dark with a RAPTOR on your vehicle. See the light demo in videos tab below.

Additional Details Below
Add to Wishlist
Add to Wishlist
SKU: RAPTOR-1 Categories: ,


The Raptor LED Strobe Light is the newest addition to our lineup of Wicked Warnings LED strobes. This strobe is within the same family of lights as our Razor and shares the same SYNCABLE flash patterns also, though the Raptor is much larger. The dimensions of the Raptor’s lens are: 8-7/16”W x 1-7/8”H x 1-3/4”D. Including the housing, the width of this light will measure in at right around 9”.

This robust light is perfect for use in larger vehicles such as dump trucks or flatbeds. The Raptor features an aluminum base and stainless steel outer bezel for added impact resistance. The rounded lens also spreads the light out at 180-degrees for extremely effective warning from this light head. There are 13 total flash patterns and 24 total LEDs within the light, including 12 amber LEDs and 12 white LEDs. This LED strobe is a true dual-color strobe light. This means that you can choose to flash an all-white pattern, all-amber pattern or a pattern that uses a combination of both amber and white strobes. This LED strobe light also features our popular flood mode feature. This feature allows you to steady burn white light throughout the entire light head by connecting the white wire. The Raptor can also be synchronized with some of our other Wicked Warnings strobe light products such as the RAZOR.

Watch our demo video of the Raptor LED strobe light in the Videos tab on this page or on YouTube by clicking here. If you have any questions about the Raptor, please send us an email at info@wickedwarnings.com or send us a message using a form on our website.

Raptor LED Strobe Light Features:

  • 13 Flash Patterns
  • 24 Total LEDs (12 Amber & 12 White)
  • IP67 Waterproof Rating
  • Aluminum Base & Stainless Steel Housing
  • 180-Degree Lens
  • Dual-Color Amber & White Strobe
  • Flash All-Amber, All-White, or Both Amber & White
  • Flashing is 1.0 amp
  • Flood is 0.5 amp
  • 8-7/16”W x 1-7/8”H x 1-3/4”D
  • SYNC with RAZOR and ECO HAW
  • These lights are sold individually.

Amp Draw:

LED 12.8V 25.6V 30V
Amber 0.91A ~ 1.23A 0.47A ~ 0.63A 0.41A ~ 0.55A
White 0.91A ~ 1.23A 0.47A ~ 0.63A 0.41A ~ 0.55A
White Steady Burn 0.48A ~ 0.66A 0.27A ~ 0.37A 0.24A ~ 0.32A



Installation Guide

Raptor LED Strobe Light Installation Guide

Have a Question?

Subscribe To Our Newsletter

Subscribe To Our Newsletter

Join our mailing list to receive $5 off your purchase! Coupon can be used once per customer.

Our monthly email will have updates about our latest news, products and updates from our team!

You have successfully subscribed! Enjoy $5 off your purchase by entering the following coupon code at checkout: MY5

Video Demonstration of Wire Swap Installation for Auto Flasher Kits - Molex Connector Pin Removal & Replacement

What are the Wicked Auto Flasher Kits & how do they work?

Wicked Warnings has been around since 2005 with stellar references and we have been using our WAF (Wicked Auto Flasher) module since early 2016 with zero reported vehicle failures. There is no known risk to using any factory lighting as flashers that we are aware of. Of course, all your factory lights will always revert to factory function when the strobes are not being used.

Many of our builds feature a combination of factory lighting as well as purpose-built emergency lights to create a more effective display, so we urge you to consider more than just factory strobe lighting on your build. We have many options available to supplement the factory lighting.

How does the Auto Flasher connect to my truck anyway?

We have 3 connection methods used in our WAF (Wicked Auto Flasher) kits. The way that we manipulate the factory lighting is through the wires. We DO NOT reprogram any of the computers. Everything we do is easily reversible, and any number of individual kits can be combined onto a single switch if desired. There is no single kit to flash all factory lights, as we must retain circuit individuality. The following three methods are used to interface with the factory wires.

  • Wire Cut: In certain lights, like the white cargo light by the third brake, the only way is to cut a single wire (at this time). We understand that some people are uncomfortable cutting wires and we are working hard to offer “cut-free” solutions as fast as we can. This is how some of the current website kits are sold. Sometimes, this is the only option to achieve the desired display.
  • Wire Swap NO CUT: This is by far our favorite solution and how most of the new generation kits will be made if possible. Wire Swap is how ALL the Headlight and Taillight kits are going to be made for the FORD and many GM trucks. We are working to update the current website options to this new “wire swap” kit and will continue noting any changes on the product online as they happen. It really is just as easy as swapping a wire. Again, the kits will have notes in the description stating which version they are. Click here to watch a video showing the Wire Swap method.
  • (NEW & COMING SOON) Plug N Play Extensions: Plug N Play extensions can be purchased for an extra cost. Please bear with us as these are all handmade and fairly difficult to source parts for. We have some availability and are waiting on some parts for others.

We hope this helps to answer any questions about our Auto Flasher Kits and hope you enjoy these products!


Your Cart