LED HAW DUO

$129.00$135.00

First choose your version, then choose your color.

  • These lights are a SET, you get 2 lights on each HAW ordered.
  • The High Dome (HD) and Low Dome (LD) versions refer to the lens size. Low Dome is most universally used as the lens is shorter and it can fit within smaller locations. High Dome has a taller lens to use in locations where you have the extra room.
Additional Details Below
Add to Wishlist
Add to Wishlist

The LED HAW DUO is a hideaway strobe light and one of our best selling LED products. This convenient kit comes with two strobes for use inside of factory lens locations such as taillamps and cargo lights or back-mounted into bumper or body. This duo is available in FIVE different solid colors allowing you to customize the look and purpose of your lights while maximizing brightness. You can also synchronize the LED HAW DUO with a number of our other Wicked Warnings LED strobe lights.

Our LED Hideaway Duo is available in both LD (low dome) and HD (high dome) versions. The high dome version is available in amber or white. The low dome version is available in 5 different color options including amber, green, blue, red or white. Also, be sure to check out our surface mounting flanges to secure the LED HAW DUO where you desire. For example, you can use the mounting flanges to mount these LED hideaway strobe lights on the new GM rear step bumpers. The mounting flanges are available in black or silver color options and are sold in 2-packs.

Let our team at Wicked Warnings install this light for you or check out the DIY playlist on our YouTube Channel to learn more about installing this product. Also, you can reference the LED HAW DUO Instruction Guide.

If you have any questions about our LED hideaway strobe lights, email us at info@wickedwarnings.com for more information!

Additional Features:

  • 29 flash patterns
  • Simple 5 wire hookup
  • Can be synchronized with our TIR-3 and LIN-6 lights
  • Power wire length is 48″, then 1 light has 36″ and other has 96″ of wire
  • A waterproof connection on each light for easy maintenance
  • Industry standard 1-in. hole
  • 100% waterproof
  • Brightest next-generation LEDs
  • Steady ON flood mode feature included
  • FULL WICKED WARNINGS 2yr WARRANTY
Weight 3 lbs
Dimensions 4 × 5 × 5 in
Version

High Dome (HD), Low Dome (LD)

Color

Amber, Blue, Green, Purple, Red, White

Videos

Instruction Guide

LED HAW DUO Instruction Guide

Have a Question?

You may also like…

Subscribe To Our Newsletter

Subscribe To Our Newsletter

Join our mailing list to receive $5 off your purchase! Coupon can be used once per customer.

Our monthly email will have updates about our latest news, products and updates from our team!

You have successfully subscribed! Enjoy $5 off your purchase by entering the following coupon code at checkout: MY5

Video Demonstration of Wire Swap Installation for Auto Flasher Kits - Molex Connector Pin Removal & Replacement

What are the Wicked Auto Flasher Kits & how do they work?

Wicked Warnings has been around since 2005 with stellar references and we have been using our WAF (Wicked Auto Flasher) module since early 2016 with zero reported vehicle failures. There is no known risk to using any factory lighting as flashers that we are aware of. Of course, all your factory lights will always revert to factory function when the strobes are not being used.

Many of our builds feature a combination of factory lighting as well as purpose-built emergency lights to create a more effective display, so we urge you to consider more than just factory strobe lighting on your build. We have many options available to supplement the factory lighting.

How does the Auto Flasher connect to my truck anyway?

We have 3 connection methods used in our WAF (Wicked Auto Flasher) kits. The way that we manipulate the factory lighting is through the wires. We DO NOT reprogram any of the computers. Everything we do is easily reversible, and any number of individual kits can be combined onto a single switch if desired. There is no single kit to flash all factory lights, as we must retain circuit individuality. The following three methods are used to interface with the factory wires.

  • Wire Cut: In certain lights, like the white cargo light by the third brake, the only way is to cut a single wire (at this time). We understand that some people are uncomfortable cutting wires and we are working hard to offer “cut-free” solutions as fast as we can. This is how some of the current website kits are sold. Sometimes, this is the only option to achieve the desired display.
  • Wire Swap NO CUT: This is by far our favorite solution and how most of the new generation kits will be made if possible. Wire Swap is how ALL the Headlight and Taillight kits are going to be made for the FORD and many GM trucks. We are working to update the current website options to this new “wire swap” kit and will continue noting any changes on the product online as they happen. It really is just as easy as swapping a wire. Again, the kits will have notes in the description stating which version they are. Click here to watch a video showing the Wire Swap method.
  • (NEW & COMING SOON) Plug N Play Extensions: Plug N Play extensions can be purchased for an extra cost. Please bear with us as these are all handmade and fairly difficult to source parts for. We have some availability and are waiting on some parts for others.

We hope this helps to answer any questions about our Auto Flasher Kits and hope you enjoy these products!

0

Your Cart