Flush Mount Rocker Switch
Full Illumination Flush Mount Rocker Switch
Small Dot Flush Mount Rocker Switch
Yellow Duckbill Switch

¾” Flush Mount LED Rocker Switch

$2.50$5.00

Clear
Add to Wishlist
Add to Wishlist
SKU: N/A Categories: ,

Here we have our most popular switch from Wicked Warnings, the 3/4″ Flush Mount LED Rocker Switch. This LED rocker switch is easy to mount with a simple ¾” hole. The rocker switch handles all the LED switching needs you could want. You can utilize one switch to control all of the LED warning lights on your vehicle. Additionally, you could use more than one switch for different warning modes or to activate the popular flood mode feature that is available on many of our Wicked Warnings LED strobe lights! This switch wires with .187 female spade terminals for fast connections.

The LED indicator light within the LED Rocker Switch ensures that you can easily notice when the switches are activated. These rocker switches are also very discreet when they are not in use. If you’re unsure about where to mount your rocker switch, check out our Wicked Warnings YouTube Channel. We utilize this switch in many of our builds!

If you have any questions about the product, feel free to give us a call at 630-361-4390 or send an email to info@wickedwarnings.com and one of our product specialists will be glad to help you. Switches are sold individually.

Features:

  • Easy setup. All you need is a 3/4″(19mm)
  • BRASS TERMINAL IS GROUND, ACCESSORY ON MIDDLE TERMINAL, POWER FEED OPPOSITE OF BRASS TERMINAL
  • TERMINAL SIZE IS .187 SPADE
  • Our switch comes with a keyhole slot to prevent unwanted rotation
  • SPST 2 pole design (On/Off) with LED indicator light
  • Available in TWO versions: small dot or full illumination
  • Available in FOUR colors: Red, Blue, Green, Amber

Specification:

  • .187 Female Spade Terminals
  • BRASS TERMINAL IS GROUND, ACCESSORY ON MIDDLE TERMINAL, POWER FEED OPPOSITE OF BRASS TERMINAL
  • Bezel Color: black
  • Indicator Color: red, blue, green, amber
  • Volt: DC 12V
  • Type: 3 Pins
  • SPST: ON-OFF
  • 15-amp capacity
Color

Amber, Blue, Green, Red, Yellow

Version

Duckbill Switch, Full Illumination, Small Dot

Have a Question?

Subscribe To Our Newsletter

Subscribe To Our Newsletter

Join our mailing list to receive $5 off your purchase! Coupon can be used once per customer.

Our monthly email will have updates about our latest news, products and updates from our team!

You have successfully subscribed! Enjoy $5 off your purchase by entering the following coupon code at checkout: MY5

Video Demonstration of Wire Swap Installation for Auto Flasher Kits - Molex Connector Pin Removal & Replacement

What are the Wicked Auto Flasher Kits & how do they work?

Wicked Warnings has been around since 2005 with stellar references and we have been using our WAF (Wicked Auto Flasher) module since early 2016 with zero reported vehicle failures. There is no known risk to using any factory lighting as flashers that we are aware of. Of course, all your factory lights will always revert to factory function when the strobes are not being used.

Many of our builds feature a combination of factory lighting as well as purpose-built emergency lights to create a more effective display, so we urge you to consider more than just factory strobe lighting on your build. We have many options available to supplement the factory lighting.

How does the Auto Flasher connect to my truck anyway?

We have 3 connection methods used in our WAF (Wicked Auto Flasher) kits. The way that we manipulate the factory lighting is through the wires. We DO NOT reprogram any of the computers. Everything we do is easily reversible, and any number of individual kits can be combined onto a single switch if desired. There is no single kit to flash all factory lights, as we must retain circuit individuality. The following three methods are used to interface with the factory wires.

  • Wire Cut: In certain lights, like the white cargo light by the third brake, the only way is to cut a single wire (at this time). We understand that some people are uncomfortable cutting wires and we are working hard to offer “cut-free” solutions as fast as we can. This is how all current website kits are sold. Sometimes, this is the only option to achieve the desired display.
  • (NEW) Wire Swap NO CUT: This is by far our favorite solution and how most of the new generation kits (not on the website yet) will be made if possible. Wire Swap is how ALL the Headlight and Taillight kits are going to be made for the FORD and many GM trucks. We are also working to update the current website options to this new “wire swap” kit and will note the change on the product online when it happens. It really is just as easy as swapping a wire. Again, the kits will have notes in the description stating which version they are. Click here to watch a video showing the Wire Swap method.
  • (NEW & COMING SOON) Plug N Play Extensions: Plug N Play extensions can be purchased for an extra cost. Please bear with us as these are all handmade and fairly difficult to source parts for. We have some availability and are waiting on some parts for others.

We hope this helps to answer any questions about our Auto Flasher Kits and hope you enjoy these products!

0

Your Cart