Funeral Strobe Lights at Wicked

With winter in full swing and all the inclement weather that comes with it, being seen and safe on the road is top of mind for many. One scenario that involves unique road safety circumstances is a funeral procession. Almost everyone has either been involved in a funeral procession or watched one pass by. It’s clear to see the potential road safety issues that can arise. From navigating multi-lane roads and traffic signals to busy intersections, it is essential for the hearse or lead vehicle to have the best and brightest funeral strobe lights.

Our most recent funeral car strobe light installations include a 2021 Cadillac CT5 350, 2020 Chrysler Pacifica, and a 2020 Ford Expedition. Our superior funeral strobe lights and professional installation at Wicked Warnings will ensure that these vehicles are seen and safe from many angles and distances! See the full build videos below and watch our best-selling funeral strobe lights in action!

2021 Cadillac CT5 350 Funeral Car Strobe Lights

This video features a 2021 Cadillac CT5 350 with purple and white funeral car strobe lights. In the front of this Cadillac, we installed our LIN-6 in purple along the top of the license plate holder. Along the sides of the license plate holder, you can see our Thin-X in white. We also feature our Wicked Warnings dash light in purple mounted to the windshield. We’ve also added our LIN-6 in purple within the back window and mounted the lights using VHB. A 3/4″ Flush Mount Rocker Switch controls the funeral car strobe lights throughout this build.

If you have any questions about this install, please reference Build #18062. The end of the video also shows more detail about mounting the switch and wiring through the firewall.

2020 Chrysler Pacifica Purple and White Funeral Procession Lights

This funeral strobe lights installation features our LIN-6 and our new dual-head windshield light. We’ve installed two purple LIN-6’s in the grille in the front of this vehicle. There is a white LIN-6 in each fog light bezel, and a purple and white LIN-6 in front of each side-view mirror. The forward-facing LIN-6 funeral procession lights are flashing in a split pattern. In the upper windshield, you can see our Wicked Warnings dual-head LED Windshield Light. In the back of the vehicle, we have another pair of LIN-6’s in purple set on an alternating flash pattern. We mounted our blue full illumination 3/4″ Flush Mount Rocker Switch to control the funeral strobe lights around the vehicle. We also installed a momentary switch to activate the air horn. Please watch the video for more information about how we mounted the lights.

2020 Expedition Limited Funeral Procession Lighting with NEW DRL Auto Flasher Kit

In this video, we’re featuring purple and white funeral strobe lights. You see our Wicked Warnings Auto Flasher module flashing the factory headlight DRL C-Rings in the front. You can also see our 6 Head Wicked Slick Stick in purple and white mounted behind the bumper cover. We chose a flash pattern that alternates between purple and white out of many options. From the sides of the vehicle, you can see our two-head Windshield Light in the back window. We mounted this light using the included bracket.

From the vehicle’s rear, you can see our purple LED HAW DUO in the LD version in the reverse lenses. This vehicle has very covert funeral strobe lights. With the strobe lights turned off, you don’t notice the strobes from the outside of the vehicle. We installed a 3/4″ Flush Mount Rocker Switch in the dashboard to control the funeral strobe lights throughout this build. We also installed a momentary switch to control the air horn on the Carson Undercover Defender. The air horn works perfectly for alerting traffic about the funeral procession.

Get More Details

You can see more of our funeral vehicle builds featured on our YouTube Channel. If you would like more information about our funeral strobe lights, please visit our online store to see full product details. Still have questions? Please send us an email at

Be Seen & Be Safe!

Share on Social

Subscribe To Our Newsletter

Subscribe To Our Newsletter

Join our mailing list to receive $5 off your purchase! Coupon can be used once per customer.

Our monthly email will have updates about our latest news, products and updates from our team!

You have successfully subscribed! Enjoy $5 off your purchase by entering the following coupon code at checkout: MY5

Video Demonstration of Wire Swap Installation for Auto Flasher Kits - Molex Connector Pin Removal & Replacement

What are the Wicked Auto Flasher Kits & how do they work?

Wicked Warnings has been around since 2005 with stellar references and we have been using our WAF (Wicked Auto Flasher) module since early 2016 with zero reported vehicle failures. There is no known risk to using any factory lighting as flashers that we are aware of. Of course, all your factory lights will always revert to factory function when the strobes are not being used.

Many of our builds feature a combination of factory lighting as well as purpose-built emergency lights to create a more effective display, so we urge you to consider more than just factory strobe lighting on your build. We have many options available to supplement the factory lighting.

How does the Auto Flasher connect to my truck anyway?

We have 3 connection methods used in our WAF (Wicked Auto Flasher) kits. The way that we manipulate the factory lighting is through the wires. We DO NOT reprogram any of the computers. Everything we do is easily reversible, and any number of individual kits can be combined onto a single switch if desired. There is no single kit to flash all factory lights, as we must retain circuit individuality. The following three methods are used to interface with the factory wires.

  • Wire Cut: In certain lights, like the white cargo light by the third brake, the only way is to cut a single wire (at this time). We understand that some people are uncomfortable cutting wires and we are working hard to offer “cut-free” solutions as fast as we can. This is how some of the current website kits are sold. Sometimes, this is the only option to achieve the desired display.
  • Wire Swap NO CUT: This is by far our favorite solution and how most of the new generation kits will be made if possible. Wire Swap is how ALL the Headlight and Taillight kits are going to be made for the FORD and many GM trucks. We are working to update the current website options to this new “wire swap” kit and will continue noting any changes on the product online as they happen. It really is just as easy as swapping a wire. Again, the kits will have notes in the description stating which version they are. Click here to watch a video showing the Wire Swap method.
  • (NEW & COMING SOON) Plug N Play Extensions: Plug N Play extensions can be purchased for an extra cost. Please bear with us as these are all handmade and fairly difficult to source parts for. We have some availability and are waiting on some parts for others.

We hope this helps to answer any questions about our Auto Flasher Kits and hope you enjoy these products!


Your Cart