Razor LED Strobe Light


For now…available in AMBER-WHITE only but you can select AMBER FLASH, WHITE FLASH, or AMBER/WHITE FLASH as well as STEADY WHITE FLOOD on another wire that overrides flashing.

Additional Details Below
Add to Wishlist
Add to Wishlist


The Razor is our smallest and brightest light ever! We’ve packed 18 total LEDs inside of an ultra-slim case with the additional features that ONLY Wicked Warnings can offer. This LED strobe light features 72 flash patterns in amber AND white. You can choose all-amber, all-white, or a dual-color amber and white warning display. The Razor LED strobe light also features our popular FLOOD MODE. By applying power to the white wire, you can steady burn the white LED to use as a work light or TAKE DOWN light by overtaking the warning mode.

The Razor LED strobe features a very slim design that works perfectly within the grille of the new GM trucks. Click here to see a demo of this installation.

The Razor comes with 2 different metal mounting bracket options. Also, you can easily mount the Razor using 3m VHB tape and primer for a damage-free installation. You can synchronize up to 8 Razor LED strobe lights together. Additionally, a new Wicked Warnings flash pattern is available with this LED strobe light.

More Information

Please view our Razor LED Strobe Light Installation Guide for installation instructions and to see all of the available flash patterns. You can also watch our Razor Demo video to see this strobe light in action! If you have any questions about the Razor, please send us an email at info@wickedwarnings.com.


  • 18 flash patterns in amber, 18 white, and 36 dual colors for a total of 72 patterns
  • Low power draw of just .5 amps per light
  • Waterproof exterior rated design
  • Class 1 Warning Device
  • Sync up to 8 lights together at once on the same pattern
  • Dimensions: Length is 5 and 5/16″ Width is 9/16″ and depth is 1″
  • These lights are sold individually.



Installation Guide

Razor LED Strobe Light Installation Guide

Have a Question?

You may also like…

Subscribe To Our Newsletter

Subscribe To Our Newsletter

Join our mailing list to receive $5 off your purchase! Coupon can be used once per customer.

Our monthly email will have updates about our latest news, products and updates from our team!

You have successfully subscribed! Enjoy $5 off your purchase by entering the following coupon code at checkout: MY5

Video Demonstration of Wire Swap Installation for Auto Flasher Kits - Molex Connector Pin Removal & Replacement

What are the Wicked Auto Flasher Kits & how do they work?

Wicked Warnings has been around since 2005 with stellar references and we have been using our WAF (Wicked Auto Flasher) module since early 2016 with zero reported vehicle failures. There is no known risk to using any factory lighting as flashers that we are aware of. Of course, all your factory lights will always revert to factory function when the strobes are not being used.

Many of our builds feature a combination of factory lighting as well as purpose-built emergency lights to create a more effective display, so we urge you to consider more than just factory strobe lighting on your build. We have many options available to supplement the factory lighting.

How does the Auto Flasher connect to my truck anyway?

We have 3 connection methods used in our WAF (Wicked Auto Flasher) kits. The way that we manipulate the factory lighting is through the wires. We DO NOT reprogram any of the computers. Everything we do is easily reversible, and any number of individual kits can be combined onto a single switch if desired. There is no single kit to flash all factory lights, as we must retain circuit individuality. The following three methods are used to interface with the factory wires.

  • Wire Cut: In certain lights, like the white cargo light by the third brake, the only way is to cut a single wire (at this time). We understand that some people are uncomfortable cutting wires and we are working hard to offer “cut-free” solutions as fast as we can. This is how some of the current website kits are sold. Sometimes, this is the only option to achieve the desired display.
  • Wire Swap NO CUT: This is by far our favorite solution and how most of the new generation kits will be made if possible. Wire Swap is how ALL the Headlight and Taillight kits are going to be made for the FORD and many GM trucks. We are working to update the current website options to this new “wire swap” kit and will continue noting any changes on the product online as they happen. It really is just as easy as swapping a wire. Again, the kits will have notes in the description stating which version they are. Click here to watch a video showing the Wire Swap method.
  • (NEW & COMING SOON) Plug N Play Extensions: Plug N Play extensions can be purchased for an extra cost. Please bear with us as these are all handmade and fairly difficult to source parts for. We have some availability and are waiting on some parts for others.

We hope this helps to answer any questions about our Auto Flasher Kits and hope you enjoy these products!


Your Cart