Construction Vehicle Strobe Lights

Get your vehicle or fleet construction zone ready with Wicked Warnings! We offer various strobe lights, floodlights, and light bars to keep you seen and safe in a work zone or on a construction site. Many of our Wicked Exclusives are incredibly versatile and can be used on all different types of vehicles. Check out some of our fan-favorite builds featuring construction vehicle strobe lights! You can also see some of our most popular products below.

Jeep Wrangler Construction Vehicle Strobe Lights

This simple but effective package is perfect for construction vehicles! This Jeep Wrangler features our Mini Thin in the front. We added a TIR-3 strobe light in amber on each side of the spare tire. A single LED HAW DUO is also featured above the spare tire, mounted to a custom bracket. We installed a 3/4″ Flush Mount Rocker Switch next to the other accessory switches to activate the construction vehicle strobe lights throughout the Jeep.

New Dodge Ram Construction Truck Strobe Lights

This Dodge Ram features four of our Thin-X LIN series strobe lights in amber-white, and four of our Razor LED strobe lights in the front. The back of this truck features two of our 28″ Thin-X Strip lights flashing in a fast amber-white alternating pattern and two of our LED HAW DUO strobe lights in the LD version. We chose to add the amber LED HAW DUO in the reverse lens, and the white LED HAW DUO in the larger turn signal lens. The rear of the truck also features our popular flood mode option. Watch the video to see how well the flood mode lights up our shop! The factory auxiliary switches activate the construction vehicle strobe lights.

2018 F-250 Super Duty Amber & White Construction  Strobe Lights

This video features a few different Wicked Warnings LED strobes. In the front of the truck, you can see our LIN-6 and TIR-3 amber strobe lights within the grille. From the back, you can see the LED HAW DUO HD in the OEM reverse lens and the TIR-3 strobe lights side-firing on the tail light trim bezel. The sides of the truck feature our Mirror Lights Auto Flasher Kit and Thin-X within the badge. We used the factory auxiliary switches to control all of the construction vehicle strobe lights on this build.

Popular Construction Vehicle Strobe Lights

We design all of our Wicked Exclusive products with your safety in mind. Visit our online store to see our various LED construction vehicle strobe lights. Whether you need lighting for a construction vehicle, fleet, or a vehicle that you use to visit worksites or construction zones, Wicked Warnings has you covered. Here are some of our most popular construction vehicle strobe lights:

Wicked Slick Stick: The Perfect Construction Truck Light Bar

The Wicked Slick Stick is the perfect light bar for construction trucks with a sleek and modern design, various flash patterns, and the popular flood mode feature. You can mount the Slick Stick behind your truck’s grille, within the back window, to a Back Rack, and more!

grille LED light bar

If you’re looking for a roof-mounted option, the Whelen Mini Bar mounted to the Acari Drill-Free Mounting Platform makes for a great construction truck strobe light set-up.

Need help with your construction vehicle strobe lights?

Our team at Wicked is happy to help! Installation services are available at our location in Naperville, IL. Please send us an email at info@wickedwarnings.com to schedule an appointment. If you’re unsure about which products will work best with your vehicle, you can also purchase design consultation time from our online store! If you would like to use this service, please be ready to send us photos of your vehicle from all angles and with the lights on. We’ll help you select the best products for your needs and vehicle!

Share on Social

Facebook
Twitter
LinkedIn
Pinterest
Subscribe To Our Newsletter

Subscribe To Our Newsletter

Join our mailing list to receive $5 off your purchase! Coupon can be used once per customer.

Our monthly email will have updates about our latest news, products and updates from our team!

You have successfully subscribed! Enjoy $5 off your purchase by entering the following coupon code at checkout: MY5

Video Demonstration of Wire Swap Installation for Auto Flasher Kits - Molex Connector Pin Removal & Replacement

What are the Wicked Auto Flasher Kits & how do they work?

Wicked Warnings has been around since 2005 with stellar references and we have been using our WAF (Wicked Auto Flasher) module since early 2016 with zero reported vehicle failures. There is no known risk to using any factory lighting as flashers that we are aware of. Of course, all your factory lights will always revert to factory function when the strobes are not being used.

Many of our builds feature a combination of factory lighting as well as purpose-built emergency lights to create a more effective display, so we urge you to consider more than just factory strobe lighting on your build. We have many options available to supplement the factory lighting.

How does the Auto Flasher connect to my truck anyway?

We have 3 connection methods used in our WAF (Wicked Auto Flasher) kits. The way that we manipulate the factory lighting is through the wires. We DO NOT reprogram any of the computers. Everything we do is easily reversible, and any number of individual kits can be combined onto a single switch if desired. There is no single kit to flash all factory lights, as we must retain circuit individuality. The following three methods are used to interface with the factory wires.

  • Wire Cut: In certain lights, like the white cargo light by the third brake, the only way is to cut a single wire (at this time). We understand that some people are uncomfortable cutting wires and we are working hard to offer “cut-free” solutions as fast as we can. This is how some of the current website kits are sold. Sometimes, this is the only option to achieve the desired display.
  • Wire Swap NO CUT: This is by far our favorite solution and how most of the new generation kits will be made if possible. Wire Swap is how ALL the Headlight and Taillight kits are going to be made for the FORD and many GM trucks. We are working to update the current website options to this new “wire swap” kit and will continue noting any changes on the product online as they happen. It really is just as easy as swapping a wire. Again, the kits will have notes in the description stating which version they are. Click here to watch a video showing the Wire Swap method.
  • (NEW & COMING SOON) Plug N Play Extensions: Plug N Play extensions can be purchased for an extra cost. Please bear with us as these are all handmade and fairly difficult to source parts for. We have some availability and are waiting on some parts for others.

We hope this helps to answer any questions about our Auto Flasher Kits and hope you enjoy these products!

0

Your Cart