Ford dual 10 grille kit
18-19 f150 10in black series leds
Ford dual 10in LED grille kit

Ford Dual 10-in LED Grille Kit (18-20 F-150 | XLT)

$199.95

Please note that all Rough Country LED Products are shipped directly from the warehouse and shipping times may vary. The black series is pictured and sold on our website. For the chrome series, please send us an email at [email protected]

Additional Details Below
Add to Wishlist
Add to Wishlist
SKU: FORD_10_IN_GRILLE_KIT_70808 Category:

The Ford Dual 10-in LED Grille Kit for 18-19 F-150 XLT is a sleek, recessed LED kit. The kit fits into the two slots in the factory grille, providing the perfect location for forward-facing LED power. The Ford Dual 10-in LED Grille Kit fits in so well it looks like a factory upgrade!

Despite the tiny size, this powerful, dual 10-inch LED setup provides a jaw-dropping 4,800 lumens of lighting power with a flood beam pattern, enough to light up the trail ahead and then some! Each LED features a die-cast aluminum housing and IP67 waterproof rating, so it’s sure to withstand the elements each and every time.

Upgrade your 18-19 F-150 XLT with Rough Country’s 10-in LED Grille Kit today and release your truck’s true potential! If you have any questions about the Ford Dual 10-in LED Grille Kit, send us an email at info@wickedwarnings.com. Be Seen & Be Safe!

All Rough Country LED Products are shipped directly from the warehouse and shipping times may vary.

Features:

  • Clean, flush design
  • 4800 Lumens (pair)
  • 60 Watts (pair)
  • Flood Beam
  • Each light contains 10, 3-watt High-Intensity Cree LEDs
  • Durable Die-Cast Aluminum Housing
  • IP67 Waterproof Rating
  • Includes premium, flat-wound wiring harness with on/off switch
  • 3-year Warranty

Please Note:

This kit fits XLT grilles ONLY and is ONLY for off-road use. California Residents: Prop65 Warning

Dimensions 22.19 × 3.45 × 3 in

Installation Guide

Ford Dual 10-in LED Grille Kit Install Guide

Have a Question?

Subscribe To Our Newsletter

Subscribe To Our Newsletter

Join our mailing list to receive $5 off your purchase! Coupon can be used once per customer.

Our monthly email will have updates about our latest news, products and updates from our team!

You have successfully subscribed! Enjoy $5 off your purchase by entering the following coupon code at checkout: MY5

Video Demonstration of Wire Swap Installation for Auto Flasher Kits - Molex Connector Pin Removal & Replacement

What are the Wicked Auto Flasher Kits & how do they work?

Wicked Warnings has been around since 2005 with stellar references and we have been using our WAF (Wicked Auto Flasher) module since early 2016 with zero reported vehicle failures. There is no known risk to using any factory lighting as flashers that we are aware of. Of course, all your factory lights will always revert to factory function when the strobes are not being used.

Many of our builds feature a combination of factory lighting as well as purpose-built emergency lights to create a more effective display, so we urge you to consider more than just factory strobe lighting on your build. We have many options available to supplement the factory lighting.

How does the Auto Flasher connect to my truck anyway?

We have 3 connection methods used in our WAF (Wicked Auto Flasher) kits. The way that we manipulate the factory lighting is through the wires. We DO NOT reprogram any of the computers. Everything we do is easily reversible, and any number of individual kits can be combined onto a single switch if desired. There is no single kit to flash all factory lights, as we must retain circuit individuality. The following three methods are used to interface with the factory wires.

  • Wire Cut: In certain lights, like the white cargo light by the third brake, the only way is to cut a single wire (at this time). We understand that some people are uncomfortable cutting wires and we are working hard to offer “cut-free” solutions as fast as we can. This is how some of the current website kits are sold. Sometimes, this is the only option to achieve the desired display.
  • Wire Swap NO CUT: This is by far our favorite solution and how most of the new generation kits will be made if possible. Wire Swap is how ALL the Headlight and Taillight kits are going to be made for the FORD and many GM trucks. We are working to update the current website options to this new “wire swap” kit and will continue noting any changes on the product online as they happen. It really is just as easy as swapping a wire. Again, the kits will have notes in the description stating which version they are. Click here to watch a video showing the Wire Swap method.
  • (NEW & COMING SOON) Plug N Play Extensions: Plug N Play extensions can be purchased for an extra cost. Please bear with us as these are all handmade and fairly difficult to source parts for. We have some availability and are waiting on some parts for others.

We hope this helps to answer any questions about our Auto Flasher Kits and hope you enjoy these products!

0

Your Cart